Small size Toner Cartridges Treatment For Recycling
Small size Toner Cartridges Treatment For Recycling
Small size Toner Cartridges Treatment For Recycling
Small size Toner Cartridges Treatment For Recycling
Small size Toner Cartridges Treatment For Recycling
Small size Toner Cartridges Treatment For Recycling
Model
SPT001

Review

Description

Toner Cartridges Treatment For Recycling 

The stable growth of modern office equipment has also brought the corresponding toner cartridge, toner drum and other consumables at a rate of 30% per year. These non-degradable consumable materials are discarded as garbage, which not only causes resource waste, but also increasingly threatens people's living environment. Toner and toner cartridge carry or spill carbon powder particles are extremely small, not only pollute the environment, but also harmful to human respiratory system.

 

The toner cartridge consists of plastic, iron, magnetic, aluminums, copper, soft material and toner, usually with residual toner accounting for 10-20% of toner weight. Plastic accounts for 41% of the weight of waste gas tone. Recycling of waste toner cartridge is to separate, recycle and utilize the ferromagnetism, nonferrous metals, precious metals and organic materials, stabilize or remove harmful components by means of mechanical and physical methods, and reduce environmental pollution

ADVANTAGES:


1.Simple collect the toner powder 

2.Destroyed safety with explosion protection 

3.Seperate ferrous metal and non-ferrous metals and plastics 

4.Only need two person to control this recycling line

5.Toner collection to avoid of explode and pollution when in the shredding.

How to process                             

1. Feeding the toner Cartridges to the first stage shredder with variable frequency feed conveyor belt, double shafts and double motor drive can meet the requirements of continuous shredding of materials, after the shredding output size is 30mm*150mm;

 

2. The roller screen is used to shake and screen out materials and toner. The toner duster collection can remove 95% of toner

 

3. Drive the conveyor belt to send the toner cartridge fragments to the secondary shredder, double shafts and double motor drive can meet the requirements of material continuous grinding and make the output size is 30mm*100mm, and the sealed suction pipe continues to remove the remaining toner;

 

4. The conveyor belt shall send the toner cartridge fragments to the three-stage compound crusher with the output size of 20mm*80mm, and the sealed dust suction pipe shall clear up to 99.9% carbon powder and dust;

 

5. Iron removal screen separates iron and delivers it to the discharge bin

 

6. The eddy-current sorting system separates aluminum and plastics and delivers them to their respective discharge bins


Technical Data                             
After shredding, Separated the aluminum,metal,plastic and toner.
Aluminum
Metal
Plastic
Toner